@conference {4266,
	title = {Hybrid VSI Compensator for AC/DC Microgrid},
	booktitle = {IEEE TENSYMP 2019},
	year = {2019},
	month = {8 June 2019},
	publisher = {IEEE TENSYMP 2019},
	organization = {IEEE TENSYMP 2019},
	address = { Kolkata , India},
	author = {Ginnes K John and M R Sindhu and TNP Nambiar}
}
@conference {4276,
	title = {A review on power electronic converters for inductive power transfer system},
	booktitle = {GBSE 2019},
	year = {2019},
	month = {Feb 2019},
	publisher = {Conference procedings },
	organization = {Conference procedings },
	address = {Rajagiri School of Engineering and Technology , Kochi, Kerala, India},
	author = {SanjuSurendran and Ginnes K John}
}
@conference {4285,
	title = {Solar Integrated Power Quality Compensator for Cluster of Critical and Sensitive Loads},
	booktitle = {International Conference on Artificial Intelligence, Smart Grid and Smart City Applications, (AISGSC 2019)},
	year = {2019},
	month = {Jan 03-05,2019},
	publisher = {Conference proceedings},
	organization = {Conference proceedings},
	address = {PSG College of Technology, Coimbatore, India},
	author = {Ginnes.K.John and Sindhu M R and TNP Nambiar}
}
@proceedings {4102,
	title = {A Closed loop high gain dc-dc converter for electric drive applications},
	journal = {International Conference on Control, Power, Communication and Computing Technologies (ICCPCCT)},
	year = {2018},
	pages = {40-44},
	publisher = {IEEE},
	address = {Kannur , India},
	author = {jeesonCheriyan and Santhi B and Ginnes K John}
}
@article {4066,
	title = {Speed Control of Wind Powered Sensorless BLDCM Implementing Zeta Converter with PFC},
	journal = {International Journal for Research in Applied Science \& Engineering Technology (IJRASET)},
	volume = {6},
	year = {2018},
	pages = {2043-2050},
	author = {Tito Joseph Francis and Ginnes K John}
}
@book {3556,
	title = {Power Electronics Laboratory Manual - Design , testing and Simulation},
	year = {2017},
	publisher = {CBS Distributors and Publishers },
	organization = {CBS Distributors and Publishers },
	edition = {1},
	address = {Across India},
	author = {KRVarmah,KJohn Ginnes,ChikkuAbraham}
}
@article {3558,
	title = {Simulation of three level boost PFC converter with capacitor voltage balancing for a sensorless BLDC drive},
	journal = {International Journal For Research \& Development In Technology, ISSN (O) :- 2349-3585},
	volume = {8},
	year = {2017},
	pages = {226-231},
	abstract = {Abstract {\textendash} This paper presents a position sensorless
operation of BLDC motor. Commutation is based on
detection of back-EMF zero crossing from the terminal
voltages. The method make use of the difference of line
voltages measured at the terminals of the motor. The
difference of line voltages provide an amplified version of
back EMF. The commutation signals are obtained without
the motor neutral voltage. The dc supply to the inverter is
supplied by a three level boost type converter with power
factor correction. Capacitor voltage balancing is also
achieved. The effectiveness of the proposed method is
demonstrated through simulation results. The simulation
result shows that the output voltage of converter remains
regulated, the capacitor voltages are balanced. Also the
power factor obtained is nearly unity.},
	author = {Rasna Joy Thomas and Ginnes K John}
}
@article {3557,
	title = {Torque Ripple Minimization of a Switched Reluctance Motor using Direct Instantaneous Torque Control},
	journal = {International Journal For Research \& Development In Technology, ISSN (O) :- 2349-3585},
	volume = {7},
	year = {2017},
	pages = {114-119},
	abstract = {<p>Abstract{\textemdash} Torque ripple is one of the major disadvantages of Switched Reluctance Motor (SRM) drives due to its double salient geometry and it is a serious drawback in applications that require smooth torque and high dynamic performances. This paper presents the minimization of torque ripple in SRM using an enhanced direct instantaneous torque control. Linear and non linear modelling is done in SIMULINK. SRM is modelled in ANSYS MAXWELL (FEA method) and the inductance and torque values are obtained. These values have been provided as look up table in MATLAB for obtaining the non linear characteristics of SRM. The switching control rules in each inductance region are then described according to the characteristics of asymmetric power converter. In order to test the method, a SRM drive system is simulated in MATLAB SIMULINK after detailed analysis of linear and non linear models.</p>},
	author = {DhanyaClaraJoseph and Mejo Paul and Ginnes K John}
}
@book {3262,
	title = {Fundamentals of Electrical Machines and Drives},
	year = {2016},
	publisher = {Cengage Learning India},
	organization = {Cengage Learning India},
	edition = {1},
	author = {K R Varmah and Chikku Abraham and Ginnes K John}
}
@conference {3261,
	title = {Simulation of three level boost PFC converter with capacitor voltage balancing for a sensorless BLDC drive},
	booktitle = {RAEE{\textquoteright}16 , Christ University,  Banglore},
	year = {2016},
	address = {Christ University,  Banglore},
	author = {Rasna Joy Thomas and Ginnes K John}
}
@article {3260,
	title = {Design, Modeling and Simulation of a New Single Input Dual Output DC-DC-AC Converter Technique for Photovoltaic Systems},
	journal = {International Journal of Applied Engineering Research, Vol. 10 No.88, pp 114-119.},
	volume = {10},
	year = {2015},
	pages = {114-119},
	author = {Toncy Tony and Ginnes K John}
}
@article {3259,
	title = {Genetic Algorithm Based PID Tuning for a DTC Controlled Induction Motor},
	journal = {International Journal of Engineering Research \& Technology (IJERT), Vol. 4 Issue 10 , October-2015,pp 305-310},
	volume = {4},
	year = {2015},
	pages = {305-310},
	author = {Amal K Paul and Ginnes K John}
}
@proceedings {3258,
	title = {Simulation of closed loop control of BLDC Motor drive fed by canonical switching cell converter with improved power quality},
	journal = {international conference on energy, environment, materials and safety-ICEEMS{\textquoteright}14 (ISBN: 978-93-80095-58-5)},
	year = {2014},
	pages = {13-19},
	publisher = {Cochin University of science and Technology (CUSAT), Kochi},
	address = {Kochi},
	author = {Anu Narayanan and Ginnes K John}
}
@article {1156,
	title = {Analysis of an Economical BLDC Drive System},
	journal = {International Journal of Advanced Research in  Electrical, Electronics and Instrumentation Engineering },
	volume = {2},
	year = {2013},
	pages = {182-190},
	author = {Ginnes.K.John and Maria Shaju}
}
@proceedings {1167,
	title = {Circuit design and simulation of low voltage energy harvesting using switching converters },
	journal = {National Conference Proceeding of NCIEEE{\textquoteright}12 (ISBN: 978-81-909042-6-1) Volume 2, 1st {\textendash} 2nd March 2012},
	year = {2012},
	address = {Sathyabama University, Chennai},
	author = {Ginnes K John and K Vinida and K R Varmah}
}
@proceedings {1162,
	title = {Simulation of Current Controlled Modulation Technique for Brushless DC Motor},
	journal = {ICETE-12 (ISBN: 978-81-923974-0-5) 15th-16th  May 2012},
	year = {2012},
	address = {Nittie , Maharashtra},
	author = {Ginnes K John and Shiju Ramachandran}
}
@proceedings {1158,
	title = {Simulation of vibration based green energy harvesting system},
	journal = {International conference proceeding of IRNet  Explore ICEECS-2012 Conference  11th November 2012},
	year = {2012},
	address = {Trivandrum ICEECS-2012},
	author = {Ginnes K John and K Vinida}
}
@article {1169,
	title = {Implementation of Three phase Shunt Hybrid Filter Using ICOSφAlgorithm},
	journal = {Asian Power Electronics Journal},
	volume = {Vol.5 },
	year = {2011},
	pages = {7-12},
	author = {Ginnes K John and Sindhu.S and Sindhu M.R,  Manjula G Nair}
}
@article {1174,
	title = {DSP based digital controller for shunt active power filter to improve   power quality},
	journal = {International Journal of Recent Trends in Engineering},
	volume = {Vol 2},
	year = {2009},
	pages = {92-94},
	author = {Ginnes K John and Sindhu M R2 and Manjula G Nair}
}
