Objective

            To develop my career as an Engineer where I will be a valuable team player, contributing creative ideas and quality work with full commitment for the development of the organization.

 Working Experience

1. Rajagiri School of Engineering & Technology, Kakkanad, Kerala – Working as Assistant Professor in Mechanical Engineering Department from 16^th July 2018 till date.

 2. Viswajyothi College of Engineering & Technology, Muvattupuzha, Kerala - Worked as Assistant Professor in Mechanical Engineering Department from December 2011 to June 2012 (7 months).

 3. GNA Udyog Ltd, Driveline Division, Bundala, Jalandar, Punjab – Worked as Design Engineer Trainee (1year 3months). 

Responsibilities: Design and Testing (Research and Development Team) from 14^th July 2010 to 5^th October 2011)

Design of propeller shaft as per customer requirement, prototype assembly, testing of propeller shaft on dynamometer test rig, road test, coordination with customer on testing and technical issues.

 4. FCI Technology Services Ltd, Global Tooling Centre, Mulanthuruthy, Kerala –Worked as  - Graduate Engineer Trainee from 24^th March 2008 to 12^th December 2008, (8 months)

      Responsibilities:-

            Shift In-Charge (Coordination of design and production)

 Publications

 1          Jibin Jafar, Anashwara S. Nair, Aswin Biju, Jeswin Kaleeckal Jacob, Senjo Manuel, Joseph Babu. K “An Integrated Approach To Plastic Sorting” International Journal of Mechanical and Production Engineering Research and Development, Vol. 9, (2019), pp.21-32

2          K. J. Babu, K. P. Nair and M.L. Joy, “Development of cutting fluid from transesterified coconut oil and evaluation of its tribological properties,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Vol 233, (2018),pp 01-11

3          K. J. Babu, A. S. Kynadi, M.L. Joy, and K. P. Nair, “Enhancement of cold flow property of coconut oil by alkali esterification process and development of a bio-lubricant oil,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 232, (2017),pp. 307-314, 2017.

4          D. Tripathi, K. J. Babu, K. P. Nair, and K. Sekar, “Chemical Modification of Palm Oil for Low Temperature Applications and its Study on Tribological Properties,” Journal of Advanced Engineering Research, Volume 4, Issue 2, (2017), pp.109-113

5          Joseph Babu K., Prabhakaran N.K. and Joy M.L., “Pressure variations in hydrodynamic bearings due to lump formation on the surface of the bearings,” Technology letters, vol 2, no.1 (2015) 16-15

International conferences

 6          Joseph Babu K., Prabhakaran N.K. and Joy M.L, “Physio-tribological properties of lithium based grease developed from coconut oil (cocos nucifera) and analysis on crystal formation in grease,” ECOTRIB 2017, 6th European Conference on Tribology, June 7-9, 2017, Ljubljana, Slovenia.

7          Joseph Babu K. , Prabhakaran N. K. and Joy M.L, “Pressure variations in hydrodynamic bearings due to lump formation on the surface of the bearings,” ICAT14, International Conference on Advances in Tribology-2014, February 21-24, 2014, Calicut, India.         

National conferences

 8          Jibin Jafar, Anashwara S. Nair, Aswin Biju, Jeswin Kaleeckal Jacob, Senjo Manuel, Joseph Babu. K “An Integrated Approach To Plastic Sorting”, ICAME2019, Thrissur, India.

9.         D. Tripathi, K. J. Babu, K. P. Nair, and K. Sekar, “Chemical modification of palm oil for low temperature applications and a study on its tribological properties,” ENERGY2016, National Conference on Energy, Economy and Environment, December 16-17, 2017, Calicut, India.

 10        Joseph Babu.K, Ram Mohan and T.J. Paulson, “Analysis and Control of Vibration on Propeller Shaft in Automobiles,” NET2011, National Conference on Emerging Trends in Engineering & Technology, February 25-26, 2011, Calicut, India.